14Local Install: Windows USB PortSoftware for Windows XPInstall the Driver of YourChoice (PCL or Postscript)□ Check that the USB cable is plugged in and the printeris powered on.□ Found New Hardware appears.□ Insert the Drivers CD supplied with your printer into theCD-ROM drive.□ Please select the best match for your hardware fromthe list below appears.• To load the PCL driver, select\drivers\parallel\win2k_xp\pcl\OK715.inf.• To load the Postscript emulation driver, select\drivers\network\win2k_xp\ps\ok715ps.inf.□ Click Next.□ If the ...Windows Logo testing.. screen appears clickContinue Anyway. Installation is completed.□ Click Finish.To Install the Second Driver asWell□ With the Drivers CD still in your CD-ROM drive, clickStart → Run.□ Browse to your CD-ROM drive and clickINSTALL.EXE, then click Open.□ Click OK.□ The License Agreement appears. Click Next.□ The Menu Installer Software Installation screenappears.□ Click the Printer Driver Installer button.□ Follow the on-screen instructions.Note: When prompted to select a port, select LPT1temporarily.□ Click Finish.When the installation is complete:□ Click Start → Settings → Printers.□ Right click the printer icon, then click Properties.□ On the Ports tab, select USB01 port in the Print to thefollowing port drop-down list.□ Click OK, then close the Printers dialog box.Install Printer SoftwareUtilities□ With the Drivers CD installed in your CD-ROM drive,click Start → Run. Browse to your CD-ROM Drive anddouble-click Install. Click OK.□ The Licence Agreement appears. Click Next.□ The Menu Installer displays. Click the ProductivitySoftware button.□ Install the utilities you want following the on-screeninstructions.To access the utility programs from your desktop, clickStart → Programs → Okidata.Activating the Duplex Unit,Internal Hard Drive andSecond Paper Tray OptionsIf your printer has an optional duplex unit, internal harddrive or second paper tray installed, you must enter thedriver and activate them. See page 5 for instructions on howto do this.