33 – C330/C530 Menu FunctionsHow to Change the Settings:Administrator ____________________The System Administrator can set whether to ENABLE or DISABLEeach category in the user menu.Disabled categories are not displayed in the User’s menu. Only asystem administrator can change these settings.1. Turn OFF the printer.2. Turn ON the printer while pressing the OK button.When Admin Menu appears, take your finger off the button.3. Press the OK button.4. At the Enter Password prompt, enter the 4-9 digit Adminpassword:(a) Using the up and down MENU buttons, scroll to therequired letter/digit.(b) Press the OK button to input and move to the next letter/digit.(c) Repeat steps (a) and (b) until all letters/digits areentered.Enter your 4 to 9 digit password. (The default password isaaaaaa).5. Press the OK button.6. Press the up or down MENU button until the “category” youwant to change is displayed.7. Press the OK button.8. Press the up or down MENU button until the “item” you wantto change is displayed.9. Press the OK button.10. Using the up or down MENU button, identify the parameteras required.11. Press the Enter button to enter an asterisk (*) on the rightside of the setting selected.12. Press the On Line button to switch to online. The machinewill automatically re-boot.