- 33 -2. Setting UpSetting Up This MachineThe first time the machine is turned on or when the settings are initialized, set up themachine with the necessary information.• Language Setup• Setting Date and Time• Setting the Administrator Password• Network Settings• Test PrintThe factory default display language is English. To change the display language to alanguage other than English, follow the steps below.1 Press the button repeatedly to select [Setting] and press the (Enter)button.2 Press the button once to select [Admin Setup] and press the (Enter)button.3 Enter the administrator password, and then press the (Enter) button.The factory default administrator password is "999999".Enter the first character of the password using the numeric keypad and press the(Enter) button. Then enter the second character of the password using the numerickeypad and press the (Enter) button. Enter the rest of the password in the samemanner. When the password entry is complete, press the (Enter) button.4 Press the button repeatedly to select [Manage Unit] and press the(Enter) button.5 Press the or button repeatedly to select [Language MaintenanceSetup] and press the (Enter) button.6 Check that [Select Language] is selected, and then press the (Enter)button.7 Press the or button repeatedly to select language you want to use andpress the (Enter) button.8 Check that [*] is displayed on the left of the selected language.9 Press the (Back) button three times to go back to the [Admin Setup]screen.Language Setup
