- 29 -2. Setting Up5 Pass the LAN cable under the tab, and then close the interface cover.6 Insert the other end of the LAN cable into the hub.Connect this machine to a network via a wireless LAN access point.1 Check if your wireless LAN access point matches the following requirements.Standards: IEEE 802.11 a/b/g/nAccess method: Infrastructure mode2 Check if the wireless LAN access point supports WPS.If it does not support WPS, check the SSID and encryption key by referring to theinstruction manual that is included in the wireless LAN access point or otherdocuments.• An SSID is also called a network name, ESSID or ESS-ID.• An encryption key is also called a network key, security key, password, or Pre-shared Key.Connecting over a Wireless LAN Connection (Only When theWireless LAN Module is Mounted)
