43085101TH Rev.1 134 /Oki Data CONFIDENTIAL5.3.2.9 Indication of printed page countersThis self-diagnosis is practiced to indicate the current number of printed pages of the printer.1. Activate the normal self-diagnostic mode, and press and hold down the [MENU+] key or [MENU-] key, until "PRINTER STATUS" appears in the display section, and then, press the ENTERkey. (The MENU+ key increments a test item, and the MENU- key decrements a test item.)2. Pressing the [MENU+] key or [MENU-] key causes the current number of printed pages to bedisplayed sequentially. (ONLINE and CANCEL keys inactive to pressing)3. Press the [BACK] key to terminate the test. (Status of Item 1 restored)5.3.2.10 Factory/Shipping switchingThis self-diagnosis is practiced to switch the PU(PRN) PCB between the Factory mode and theShipping mode.1. Activate the self-diagnostic (Level 1) mode, and press and hold down the [MENU+] key or[MENU-] key, until the following message appears.2. Pressing the [ENTER] key causes the following message to appear. Press and hold down the[MENU+] key or [MENU-], until the intended item (See the table below) is displayed.3. Pressing the [ENTER] key while the desired set item remains displayed selects the set value.4. Pressing and holding down (3 sec) the [ENTER] key while the value you want to set remainsdisplayed registers the currently displayed value on the EEPROM. Then, the status of Item 2will be restored.5. Repeat Items 2 to 4, as needed.FACTORY MODE SETFACTORY MODESHIPPING MODE *Display Lower********IMAGES********IMAGES********IMAGES********IMAGES********COUNTSDisplay UpperK-IMPRESSIONSY-IMPRESSIONSM-IMPRESSIONSC-IMPRESSIONSTOTAL SHEET CNTFormatDECDECDECDECDECUnitImagesImagesImagesImagesPrintsFunctionThe printing number of sheets of eachcolor.The indication of the total printingnumber of sheets
