Oki C5510nMFP Setup And Installation Manual

Also see for C5510 MFP: Service manual Safety and Warranty Guide Specifications User guide Handy reference

Contents

Oki C5510nMFP Setup And Installation Manual Manual pdf 7 page image

7CONNECTING THE CABLESConnect the ADF cableConnect the ADF cable (attached to the documents cover), to theADF port on the scan unit.Connect The Ethernet cableConnect one end of your Ethernet LAN cable to an available portof your Ethernet hub. Connect the other end to the LAN port atthe back of the scan unit.Connect the printing unit cableConnect one end of the USB cable (short cable) to the printingunit. Connect the other end to the Copy port of the scanning unit.Connect the computer cableConnect one end of the USB cable (long cable) to the USB porton the scanning unit. DO NOT connect the other end to yourcomputer. Complete the connection only after installing thedriver.Connect the scanning unit power adapter1. To mount the power adapter box to the back of the scanningunit, position the clip on the back of the box on the scanningunit frame as shown, then slide the box to the left until itlocks in place.2. Be sure the power switch is in the "O" position. Connect thepower adapter cable to the power port.IMPORTANT NOTE!To ensure the scan function works properly, install theScanning Unit Driver before connecting the USB cableto your computer.