C5800 Ldn Userís GuideLists of Available Settings by Menu ï 88Color MenuNote: Factory default settings are shown in bold.The printer automatically adjusts color balance and density atappropriate intervals, optimizing the printed output for brightwhite paper viewed in natural daylight conditions.The items on this menu provide a means of changing thedefault settings for special or particularly difficult print jobs.Settings revert to their default values when the next print jobis complete.Item Settings ExplanationDENSITYCONTROLAUTOMANUALAUTO = image density is automaticallyadjusted:ï at power onï when a new image drum or tonercartridge is installedï at intervals of 100, 300 and 500 drumcountsAuto adjustment takes up to 55seconds.Switch to manual only if you wish toinitiate Density Control manually usingthe printer menu.ADJUST DENSITY [EXECUTE] Selecting this will perform the autodensity set up.AJSTREGISTRATION[EXECUTE] Performs automatic color registrationadjustment. Normally this is done atpower on and when the top cover isopened and then closed. This processaccurately aligns the cyan, magentaand yellow images to the black image.C REG FINEADJUSTM REG FINEADJUSTY REG FINEADJUST-3 to + 3 inincrements of 1Default = 0Performs fine adjustment of imagetiming in relation to the black imagecomponent.A positive setting will darken the color;a negative setting will lighten the color.