Oki C711WT User Manual
Also see for C711WT: How to remove Jammed PaperMaterial safety data sheetRepack ProcedureNetwork guideQuick start guide
                                                                                      | |
Contents
| 
Menu functions > 49ADMIN SETUPITEM SETTINGS EXPLANATIONEnterPasswordxxxxxxxxxxxx Enter a password to gain entry to the Admin Setup menu.Password should be from 6 to 12 digits of alpha/numericcharacters (or mix)The default value is “aaaaaa”NetworkSetupTCP/IP EnableDisableSets TCP/IP Protocol.Enable: TCP/IP Protocol is available.Disable: TCP/IP Protocol is not available.IP Version IP v4IP v4+v6IP v6Set up the IP version.Operates with IPv4 for IPv4 (not valid with IPv6).Operates with both IPv4 and IPv6 for IPv4+v6.Operates with IPv6 for IPv6 (not valid with IPv4).There is only IPv4 and IPv4+v6 as normal value.From this stage, if IPv6 only is set from UI, for exampleTelnet, “IPv6” appears as the value of IP Version on theoperation panel. “IPv6” will disappear from the value if “IPv4” or “IP v4+v6” is selected.Display Condition: TCP/IP should be enabled.NetBEUI EnableDisableSets Enable/Disable of NETBEUI Protocol.NetBIOSover TCPEnableDisableSets Enable/Disable of NetBIOS over TCP protocol.Display Conditions:> TCP/IP should be enabled.> IP Version is not IPv6.NetWare EnableDisableSets Enable/Disable of NetWare Protocol.EtherTalk EnableDisableSets Enable/Disable of EtherTalk Protocol.Frame Type Auto802.2802.3Ethernet IISNAPSets the frame type.Display Condition: Netware should be enabled.IP AddressSetAutoManualSets the IP Address setting method.Display Conditions:> TCP/IP should be enabled.> IP Version is not IPv6.IPv4Addressxxx.xxx.xxx.xxx Sets the IP Address.Display Conditions:> TCP/IP should be enabled.> IP Version is not IPv6.Subnet Mask xxx.xxx.xxx.xxx Sets the Subnet Mask.Display Conditions:> TCP/IP should be enabled.> IP Version is not IPv6. |
Related manuals for Oki C711WT
manualsdatabase
Your AI-powered manual search engine