4 - EnglishAlways hold the power plug to connect/disconnect the power cableto/from the mains socket. Unplugging by pulling on the cable cancause fraying and may lead to fire or electric shock.This product has an earthed plug as a safety feature and will onlyconnect to an earthed socket. Do not attempt to defeat the earthingor there is a risk of fire or shock.If using an extension cable or power strip ensure that the totalcurrent rating (amperes) of all connected equipment is less than themaximum rating of the extension cable, power strip or wall outlet. Ifthe product is already supplied with a fitted power strip then noadditional power strip or extension cable should be used to connectto the mains wall outlet. Otherwise, fire or shock may occur.Ensure the power cable is routed so as not to be damaged or cause atrip hazard. If the cable becomes frayed or damaged replace itimmediately to prevent any risk of shock.Do not twist, constrict or knot the power cable as this can causeoverheating which may lead to fire or electric shock.Ensure the power socket to which the product is connected is easilyaccessible at all times and not obstructed.Use only the power cable supplied. Using a power cable not intendedfor this product may lead to fire or electric shock.To avoid risk of fire and electric shock, do not use the power cablesupplied with this product for any other electrical equipment.If you do not connect the power cord or any other cables only asdirected in the User's Guide, this may result in a fire.It is recommended that the machine is switched off prior to openingcovers; otherwise there is a risk of electric shock.When the product cover is open, do not touch the fuser unit or printhead as you may receive burns. Allow it to cool before touching.If the product casing gets extremely hot or smoke, unusual smells orabnormal noises are emitted from the product, there is a risk of fire.Unplug the mains connector and contact your dealer.If the product has been knocked over or damaged, there is a risk ofelectric shock, fire and/or injury. Unplug the mains connector andcontact your dealer.If any liquid (for example water) is allowed to enter the product,there is a risk of fire. Unplug the mains connector and contact yourdealer.Do not place containers containing liquid on the product as electricshock, fire and/or injuries may occur.If any foreign objects (for example clips) are allowed to enter theproduct, there is a risk of electric shock, fire and/or injury. Unplugthe mains connector before removing the object.Do not introduce foreign objects into the ventilation holes or operatethis product with any covers open or doors removed as electric shock,fire and/or injuries may occur.Do not use an extremely flammable spray near the product as theproduct contains high temperature parts that may cause a fire.Switch the product off before cleaning to prevent any risk of injury.Clean using a damp cloth. Do not use liquid or aerosol cleaners.Ensure loose clothing and hair is kept clear of moving parts when theproduct is in operation to prevent possible risk of injury.Do not carry out any operations on the product that are not specifiedin the User's Guide. This may result in electric shock, fire and/orinjury.Do not touch the battery if one is fitted to the product. There is a riskof explosion if the battery is replaced by an incorrect type. Theproduct battery should not require replacement during the life of theproduct.Do not throw toner cartridges or image drum cartridges into a fire asyou may receive burns from a dust explosion.After installing additional memory, hard disk drive, or any otherinternally fitted option, any covers removed or doors opened mustbe closed or replaced and secured to prevent risk of fire.The acoustic noise of this product is less than 70 dB (A) as measuredin accordance with EN ISO 7779.The operating condition range for your product is: 10 to 32°C and 20to 80% RH. Operation of the product outside this range could resultin damage to the product.If a scanner, finisher etc. is fitted, exercise care when moving theseitems so as to avoid risk of entrapment or personal injury.If the product is installed on a cabinet or high capacity feeder, ensurewheel locks are applied once placed in final position for use, toprevent risk of movement or injury.EnglishLimited Warranty, U.S. and Canada onlyU.S. and Canada onlyOki Data Americas, Inc. (Oki Data) warrants this C7350/7550(hereinafter "the Product") to be free from defects in material andworkmanship and will remedy any such defect according to, theterms of this Limited Warranty.Oki Data will repair or at its option, replace, with the same or itsfunctional equivalent, at no charge, any defective component(s)of the Product for one (1) year from the date of purchase exceptfor the printhead (LED imaging array), which is warranted for aperiod of five (5) years from the date of purchase.This Limited Warranty only extends to the original purchaser ofthe warranted item. This Limited Warranty is not transferable.This Limited Warranty does not extend to consumable items orsupplies, such as toner cartridges, image drums, ribboncartridges, fuses, etc.Overnight ExchangeUS and Canada OnlyOki Data offers Overnight Exchange of the Product underthis Limited Warranty. Overnight Exchange is only availablein the United States and Canada and it does not include thereplacement or repair of the Product's consumable items orsupplies.If you choose to use our Overnight Exchange service, call1-800-654-3282 (1-800-OKI-DATA): our trained personnelwill try to solve your problem over the phone. If theydetermine that your Product hardware is defective, anexchange product will be shipped to you via overnightcarrier. Have your credit card available as ourrepresentative will be asking for this information. You willreceive the exchange product the next business day—or nolater than the second business day.Return the original Product to Oki Data by using the samepackaging materials you received with the exchangeProduct. The Product to be returned must be madeavailable for pickup by Oki Data's representative within two(2) business days of your receipt of the exchange product:failure to do so may result in your being charged the fullprice of the exchange unit.Before you ship the product, remove the image drums andtoner cartridges to prevent damage to the product duringshipment: failure to do so may result in your credit cardbeing charged for cleaning and/or repairs to the Product.When Overnight Exchange is used, the returned machinebecomes the property of Oki Data, once it has been pickedup by Oki Data or its representative. Exchange machinesmay be new or reconditioned, at the option of Oki Data: theexchange machine becomes the property of the customerwhen the returned machine has been picked up by OkiData's designated carrier.