Network Userís Guide43Network Configuration using a WebBrowserIf the printer is connected to the network using TCP/IP, itssettings and the printer menu settings can be configured usinga Web browser. Refer to the relevant manuals for details ofhow to launch and use the browser.Using Microsoft Internet Explorer _____1. Select Internet Options in the Tools menu.2. Click on the General tab and click Settings inTemporary Internet files.3. Select Every visit to the page in Check for newerversions of stored pages.Default user name and passwordTo apply configuration changes using Microsoft InternetExplorer (or another Web browser), you will be prompted for ausername and password. The username is root and the defaultpassword is the last six characters of the Ethernet (MAC)address (any alpha characters must be in upper case).The root password can be changed to allow you to configurethe printer by using a Web browser/TELNET/AdminManager.To change the root password, select ìPassword Configurationîin the Maintenance tab and follow the on-screen instructions.Adjusting printer settingsThe network addresses used in this manual are shown asexamples only. Network addresses used in your installationmust be generated from your own network.1. Configure the IP Address, Subnet Mask and Gateway forthe network interface. Launch the Web browser, enterthe IP Address of the network interface in Address(Location/Position) and press the Enter key. ThePrinter Status screen is displayed.2. Select a tab and items to be changed in the left frame.You need to log in as ìrootî to be able to configure allitems. Non-root users cannot configure all items.