Oki C9000 Series Setup Manual
Also see for C9000 Series: Limited warrantyUser guideInstallation instructionsBrochure & specsHandy reference
                                                              | |
Contents
| 
EnglishChapter 1 - Printer Setup 93. To prevent any accidental spillage of toner, holdthe toner cartridge horizontally and remove thetape carefully and slowly.4. Make sure the colours of the toner cartridge andimage drum correspond.5. Insert the toner cartridge into the image drum, leftside first, engaging the drum spigot (1) in the hole(2) in the toner cartridge.6. Gently push the toner cartridge down engagingthe locking pin (3) into the groove (4) on theimage drum.7. Gently push the coloured lever (5) backward untilit stops to release the toner into the image drum.Note: When the printer is switched on after setting upthe printer, the message TONER LOW orCHANGE TONER maybe displayed. Thismessage should disappear after the printer hascompleted its initialisation sequence. However,this message sometimes does not disappear untilprinting has been carried out. If it still does notdisappear after printing, reinstall the tonercartridge.Loading paper1. Remove the paper tray from the printer.2. Adjust the paper guides (1) for the size of paperbeing used.3. Insert the paper size indicator (2) into the slot onthe paper tray.4. Insert the paper keeping the level of the paper inthe tray below the guide marks.9000GBS.book Page 9 Wednesday, December 6, 2000 10:07 AM |
Related manuals for Oki C9000 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine