Oki C910 Material Safety Data Sheet

Also see for C910: Hardware User guide Setup guide Troubleshooting guide Service training

Contents

8 - EnglishPreventive Measures ___________Personal Protective EquipmentRespiratory Protection: Not normally required. Forlarge spills, use dust respirator during cleanup.Protective Gloves and/or Eye Protection: Notnormally required. For large spills, use rubber glovesand safety goggles during cleanup.Engineering ControlsVentilation: Outside of normal ventilation, not normallyrequired.Other Protective Equipment and/or HygienicPractices: None.Spill CleanupSmall Spills1. Remove sources of ignition.2. Carefully clean up the spill with a wet cloth, avoidinginhalation of fine dust.Large Spills1. Remove sources of ignition and keep unnecessaryand unprotected personnel away from area.2. Wear protective gear: respirator, rubber gloves,safety goggles.3. Vacuum the spill, then wipe up remainder with a wetcloth.Waste Disposal• Prevent release of material into natural waters andsewers.• Follow appropriate federal, state and local regulations.• Small amounts can be incinerated.Careful! Combustion can create harmful gases suchas carbon monoxide and nitrogen oxides.• Large amounts must be passed to a licensed wastecontractor.PrecautionsPrecautions for Handling or Storage: Protect fromthe sun. Store in a cool room, under 104°F (40°C). Keepout of reach of children.Other Precautions: None.Shipping InformationSpecial Shipping Information: Non hazardous.Handle container carefully to avoid shock. Do not drop.Keep dry.User’s Responsibility_____________This bulletin cannot cover all possible situations which theuser may experience when using this product. Eachaspect of your operation must be examined in regard toif, or where, additional precautions may be necessary. Allhealth and safety information contained in this bulletinmust be provided to your employees or customers. It isyour responsibility to use this information to developappropriate work practice guidelines and employeeinstructional programs for your operation.Preparation Date of MSDSDate: September 15, 2010Prepared by:Oki Data Americas, IncEngineering Services Department.2000 Bishops Gate Blvd.Mt. Laurel, NJ 08054-4620Tel: (856) 235-2600Fax: (856) 222-5320http://www.okiprintingsolutions.commy.okidata.com