- 240 -Setting the network from the web browser51243Convenient printfunctions Appendix IndexChecking andChanging PrinterSettings Usingthe Control PanelNetworkSetupMatchingColorsUsing UtilitySoftware7 Set the value in [Administrator’s IPAddress setting] in [STEP3].Even if the incorrect settings were madein [Step 2] by entering the administratorIP address in [Administrator’s IP Addresssetting], the administrator can reset fromthe IP address host set in [Administrator’sIP Address setting].Notez If accessing the device via a proxy, the address ofthe proxy device will be displayed as [Your CurrentLocal Host/Proxy IP Address]. Consequently, the"Your host IP address" displayed in your hostaddress may differ.z If nothing is registered as the administrator IPaddress, access to the device may be completelydisabled depending on the settings in Step 2.z If you do not wish to register an administrator IPaddress, leave the [Administrator’s IP Addresssetting] field blank.8 Click [Submit].9 The settings will be save in the printer,and the network functions will restart.Using the accessrestriction function withMAC addressesYou can manage access to the device using theMAC address.Notez If the MAC address is entered incorrectly, access to thedevice using a network will be disabled. Be very carefulduring setup.1 Log in as an administrator.Referencez See “Logging in as an administrator” (P.223).2 Click [Admin Setup]>[NetworkSetup]>[Security].3 Click [MAC Address Filtering].
