50 – Faxing: Security FunctionsMC361/MC561/CX2731 MFP Advanced User’s Guide3 Make sure that [Fax] is selected and press to open the faxstandby screen.4 Make sure that [Add a Destination] is selected, then press .5 Specify a destination.6 Press the key.Check Broadcast DestinationWhen this function is enabled, a fax number confirmation screen isdisplayed before transmission starts. By factory default, this functionis enabled.Note• The broadcast destination check function is available only whenmultiple destinations are specified.• If [Confirm Dial] is also enabled, it is done first.• The broadcast destination check function is unavailable whenyou transmit faxes manually.Configuring Broadcast Destination1 Press the key.2 Press the down arrow key to select [Admin Setup], then press.3 Enter the administrator password.4 Use the arrow keys to select [Enter], then press .5 Press the down arrow key to select [Fax Setup], then press.6 Press the down arrow key to select [Security Function], thenpress .7 Press the down arrow key to select [Broadcast dest.], then press.8 Press the down arrow key to select [ON], then press .
