22 - EnglishLocate the Setup FormYou will find a Setup Form on page 54. You canuse this form to record needed information aboutyour network settings, then refer to it whensetting up the machine for network operation.Set the AdministrativePasswordNoteWhen using the arrow keys to make yourselections, press the key repetitively to go to theselection.1 Press on the control panel.2 Use the down arrow key to select [AdminSetup], then press .3 Use the down arrow key to select [a], thenpress six times to enter the defaultpassword: aaaaaa.4 Use the arrow keys to select [Enter] on thedisplay, then press .5 Use the up arrow key to select[Management], then press .6 Use the up arrow key to select [AdminPassword], then press .7 Use the arrow keys to select the digits of yourpassword, pressing after each digit.8 When done entering your new password, usethe arrow keys to select Enter on the display,then press .NoteThe Admin Password must have at least six digitsand is case sensitive.9 When you have entered all the digits, use thearrow keys to select [Enter] on the display,then press .10 Use the left arrow key to back out to the mainscreen.11 Enter the Admin Password on line A-1 of theSetup Form.Set Up the Network forWindows SystemsTo complete the network connection with aWindows computer, first set IP addresses for thecomputer and the machine, and then installprinter driver(s) on the computer.
