Oki CX4545 MFP Safety Information Manual

Also see for CX3535MFP: Safety information Material safety data sheet Manual Operator's manual Fax guide

Contents

Oki CX4545 MFP Safety Information Manual Manual pdf 7 page image

Notice to Users 5Notice to UsersFor the U.S.A. onlyFor the U.S.A. and CanadaAfter a suitable place has been selected for the installation of the ES9460 MFP/ES9470 MFP or CX3535 MFP/CX4545 MFP, ES9160 MFP/ES9170 MFP, please do not change it. Avoid excessive heat, dust, vibration and directsunlight. Also, provide proper ventilation as the copier emits a small amount of ozone.FCC NOTICEThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when theequipment is operated in a commercial environment. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instruction manual, may cause harmfulinterference to radio communications. Operation of this equipment in a residential area is likely to cause harmfulinterference in which case the user will be required to correct the interference at his own expense.WARNINGChanges or modification made to this equipment, not expressly approved by Oki Data or parties authorized by OkiData, could void the user’s authority to operate the equipment.User SafetyThis OKI Multifunctional Digital Systems does not produce laser radiation hazardous to the user. It is certified as aClass 1 laser product under the U.S Department of Health and Human Services (DHHS) Radiation PerformanceStandard according to the Radiation Control Health and Safety Act of 1968 including amendments.Protective housing and external covers completely confine the laser beam light emitted inside the MultifunctionalDigital Systems. The laser beam cannot escape from the machine during any phase of user operation.Regulations implemented on August 2, 1976 by the Bureau of Radiological Health (BRH) of the U.S Food and DrugAdministration apply to laser products manufactured from August 1,1976. Laser products marketed in the UnitedStates must comply with these regulations.CAUTIONUse of controls or adjustments or performance of procedures other than those specified herein may result inhazardous radiation exposure.Regulatory Information The high efficiency LCD backlights used in this product contains 5 mg or less of Mercury, the disposal of whichmay be regulated due to environmental considerations. For disposal or recycling information, please contactyour local authorities or the Electronic Industries Alliance (www.eiae.org).ES9460 MFP/ES9470 MFP/CX3535 MFP/CX4545 MFPThe unit is classified as Class 1 Laser Product according to IEC 60825-1:1993, IEC60825-1:2007 includingamendments.The unit uses laser diodes with a max. output of 30 mW, a wavelength of 790 nm at a continuous pulse.ES9160 MFP/ES9170 MFPThe unit is classified as Class 1 Laser Product according to IEC 60825-1:1993, IEC60825-1:2007 includingamendments.The unit uses laser diodes with a max. output of 10 mW, a wavelength of 785 or 793 nm at a continuous pulse.CAUTIONUse of controls or adjustments or performance of procedures other than those specified herein may result inhazardous radiation exposure.Hg