44-62 Performing Setup from the Printing Unit Control PanelES3640e MFP EFI Configuration Guide - 62Accessing Setup optionsTo access Setup when the Fiery is Idle1. With the printing unit in the ëReadyí state, press the or keysuntil the Admin Setup Menu is displayed, then press the ENTERkey.2. If an administrator password has been set up you will beprompted for it. Enter the correct administrator password andpress the ENTER key to gain access to the Setup menus.Press the or keys to choose each character of the passwordand press ENTER to advance to the next character. PressingENTER after the last character completes password entry.For first-time Setup, you must perform at least these Setups inthis order:1 ñ Server Setup2 ñ Network Setup3 ñ Printer SetupAfter the administrator password has been successfully entered ifnecessary, these and other Setup menus can be accessed usingthe or keys. Press the ENTER key to select the requiredmenu when its name is displayed.After performing these Setups, you can continue with theremaining Setups, or exit Setup and save your changes.About the Control Panel Setup interfaceWhen you perform Setup from the Control Panel, you select onemenu after another using the or keys and pressing ENTER toselect the required menu. In each menu enter information aboutyour Fiery and your network and printing environment.
