33-93 Printing Fiery FreeForm variable data documentsES3640e MFP EFI Job Management Guide - 93Tips for using Fiery FreeFormAt sites where a small number of users print FreeForm jobs, theOperator may want to assign FreeForm master numbers tospecific users, then let them monitor their own master numbers.Users can choose the Create Master print option to assign newmasters or overwrite existing masters. They can also instruct theOperator to reassign master numbers (to a number greater than15) for FreeForm masters they want available on the Fiery.At sites where a large number of users print FreeForm jobs, theOperator may want to instruct users not to use the Create Masterprint option at all, but rather to send all their jobs to the Holdqueue. In this case, the Operator can decide which FreeFormmaster numbers to assign before printing.For all jobs sent to the Fiery, users should specify information(such as the desired FreeForm master number) to the operatorusing the Notes and Instructions fields in the Printer Job Notesdialog box.Note: When specifying additional print settings for FreeForm jobs,certain print option settings must match for both the master andthe variable job. Also, certain settings in the variable job overridecorresponding settings in the master job. For completeinformation on print settings in FreeForm jobs, see thePrinting Guide Chapter 5.
