- 83 -5. ScanSending Scanned Data as an E-mail Attachment• Before Using Scan To E-mail• Entering E-mail Address to Send E-mailIf the machine is set up from [Easy Setup] > [E-mail Setting], skip Before Using Scan To E-mail. If the information is not set, set up in the following procedure.1 Check the information related to E-mail following the steps in "Checking theSetting Information".2 Press [Device Settings] on the touch panel.3 Press [Easy Setup].4 Enter the administrator name and password, and then press [OK].The factory default administrator name and password are "admin" and "999999" respectively. If the administratorpassword is changed after installing the machine, enter the updated password.5 Press [Skip>>] repeatedly to display [E-mail Setting].6 Press [Next].7 Follow the onscreen instruction to enter the information checked in Step 1.Setting E-mail (Advanced Manual)Before Using Scan To E-mail
