Oki ES8430 User Manual

Oki ES8430 User Manual Manual pdf 41 page image

Menu functions > 41CALIBRATIONChangePasswordNewPasswordxxxxxxxxxxxxxx Sets a new password to enter Admin Setup menuFrom 6 to 12 alpha/numeric digits can be entered.Verifypasswordxxxxxxxxxxxxxx Forces the User to input the new password to enter AdminSetup.From 6 to 12 alpha/numeric digits can be entered.Settings ResetSettingsExecute Resets EEPROM of CU. Resets User menu to the factorydefault.If Execute is selected, exits from the menu.SaveSettingsExecute Saves menus currently set. With this function, the menuswith which operation was last performed are saved, andoverwrites with them menus that were previously saved.When the Enter button is pressed, the followingconfirmation message appears.Are You Sure? Yes/NoWhen No is selected, the preceding menus are restored.When Yes is selected, the current menu settings aresaved and this menu is exited.ITEM SETTINGS EXPLANATIONAuto DensityModeOn/Off Enables/disables automatic density adjustment.Adjust Density Execute If Execute is selected, the printer will immediatelyadjust density and reflect it in TRC compensation.This adjustment must be executed when theprinter is idling. It can become invalid if executedin any other state.AdjustRegistrationExecute When this menu is selected, the printer performsAutoAdjust Registration.This adjustment must be executed when theprinter is idling.Print TuningPatternExecute Prints the pattern for the user to adjust TRC.Ordinarily, this function is not needed because TRC isautomatically adjusted to the recommended levelsthrough density adjustment and TRC compensation.Adjustment results will be reflected as offset values(addition) to the corrections through the AdjustDensity/TRC Compensation function.Cyan/Magenta/Yellow/BlackTuningHighlight -3,-2,-1,0,+1,+2,+3,Adjusts HIGHLIGHT (light area) of the TRC.+ = Darker- = LighterMid-Tone -3,-2,-1,0,+1,+2,+3,Adjusts MID-TONE area of the TRC.+ = Darker- = LighterDark -3,-2,-1,0,+1,+2,+3,Adjusts DARK area of the TRC.+ = Darker- = LighterCyan/Magenta/Yellow/BlackDarkness-3,-2,-1,0,+1,+2,+3,Adjusts the engine density.The Darkness settings for each of CMYK will bereflected as offset values (addition) to the correctionsthrough the Adjust Density/TRC Compensationfunction.ITEM SETTINGS EXPLANATION