Oki LD630 Technical Reference

Also see for LD630 Series: Windows driver manual Technical reference

Contents

LD630/LD640- 47 -7. TroubleshootingWhen printing doesn’t workCheck network settingWhen using Ethernet- IP AddressCheck whether the IP Address band of the printer rand the AP (orwireless terminals) are the same. The first three digits of the four digitvalue in the IP Address must be the same.- Subnet MaskCheck whether the subnet mask of the printer matches with the one inAP (or wireless terminal).- PortCheck whether the port configured in the printer and the host (PC,PDA) are the same.When using WLANCheck the wireless network setting of the AP and the printer.(Refer to Configuration for checking/changing the printer settings)- SSIDCheck whether the SSID of the printer matches with the one in AP (orwireless terminal)- 802.11 modeCheck whether AP supports 802.11b or 802.11g.Oki data printer supports 802.11b/g, and 802.11a is not supported.- Network ModeCheck the network mode of the printer.Network mode must be set to “Infrastructure” to connect to AP and“Ad-hoc” to connect between wireless terminals.- IP AddressCheck the band of the IP Address.Check whether the band of the printer and the AP (or wirelessterminals) are the same.The first three digits of the four digit value of the IP address must bethe same.- Subnet MaskCheck whether the subnet mask of the printer matches the one in AP(or wireless terminal).