Oki MB 780 Service Manual

Also see for MB780: Brochure & specs Safety information User guide Fuser Unit Replacing User guide

Oki MB 780 Service Manual Manual pdf 35 page image

Energy ConserveThis menu controls what values appear on the Power Saver menu. If Off is selected inEnergy Conserve menu, then Disabled appears in the Power Saver menu, and PowerSaver can be turned off. If On is set in Energy Conserve, the Power Saver feature cannotbe disabled.• Select Energy Conserve from the Configuration Menu.• The panel displays the setting's name in the header and ◄ [CURRENT VALUE] ►below the header row. Select ◄ or ► to change the setting. The selections are“On” and “Off”. The default is “Off”.• Select “Submit” to save your change. Select “Back” to exit without changingvalue.Min Copy Memory• Select Min Copy Memory from the Configuration Menu.• The panel displays the setting's name in the header and ◄ [CURRENT VALUE] ►below the header row. Select ◄ or ► to change the setting. For example, thevalues may be 25 MB, 35 MB, 50 MB, and 100 MB. The default is 25 MB.Values will only be displayed if the amount of installed DRAM is at least twicethe amount of the value, that is, at least 200 MB of installed DRAM is required todisplay the 100 MB selection.• Select “Submit” to save your change. Select “Back” to exit without changingvalue.NumPad Job Assist• Select NumPad Job Assist from the Configuration Menu.• The panel displays the setting's name in the header and ◄ [CURRENT VALUE] ►below the header row. Select ◄ or ► to change the setting. The selections are“On” and “Off”. The default is “Off”.• Select “Submit” to save your change. Select “Back” to exit without changingvalue.Format Fax StorageThis setting enables you to format the non-volatile storage used for storing faxes.To change this setting:• Select Format Fax Storage from the Configuration Menu.• “Formatting Fax Flash DO NOT POWER OFF” appears on the LCD while theformat operation is active. Note: If an advanced password has been established,you must enter this password in order to change the setting.35