Scanning With the Machine 6-215 Press the or key to select the address to be deleted from the favoritelist, and then press the STOP/RESET key.6 Press the or key to select YES, and then press ENTER key.The selected address is deleted.7 To delete another address, repeat the procedure from step 5.8 To finish deleting addresses, press the BACK key.9 Press the or key to select FINISH, and then press the ENTER key.Registering Speed Dial Destinations (Direct Input)E-mail addresses can be registered as speed dial destinations. A maximumof 250 speed dial destinations can be registered." Machine key operations cannot be used to register an FTP address orSMB address as a speed dial destination. These addresses can beregistered with the Setup Utility." Speed dial destination numbers 221 to 250 are reserved for register-ing FTP addresses and SMB address from the Setup Utility.1 In the main screen (Scan mode), press the or key to select UTIL-ITY, and then press the ENTER key.2 Press the or key to select DIAL REGISTER, and then press theENTER key.3 Press the or key to select SPEED DIAL, and then press the ENTERkey.4 Use the keypad to type in the number (between 1 and 220) for the speeddial destination, and then press the ENTER key.5 Press the or key to select MANUAL SETTING, and then press theENTER key." If an LDAP server is not specified, step 5 is skipped.6 Use the keypad to type in the registration name, and then press theENTER key." For details on entering/editing text, refer to “Entering Text” onpage A-6." A maximum of 20 characters can be entered.7 Use the keypad to type in the e-mail address, and then press the ENTERkey.The settings are registered, and the DIAL REGISTER menu appearsagain.
