Oki MC160MFP Maintenance Manual
Also see for MC160MFP: User guideSoftware installationSafety and Warranty GuideNetwork guide
                                                                                                                                                                                                               | |
Contents
|
44292401TH Rev.1 150 /Oki Data CONFIDENTIAL ADJUSTMENT/SETTING15.3 Soft switch definitionNOTE15.3.1 SOFT SWITCH: #01: Default settings of U.S.Bit No. Designation FunctionInitialSettingBit HEX8Reserved Reserved007 06 05 04 013 02V.34 CI signal bytenumber01 1Bytenumber 30 bytes 15 bytes 9 bytes 60 bytesBit No. 2 0 0 1 1Bit No. 1 0 1 0 115.3.2 SOFT SWITCH: #02• Bit 2-3: In G3 mode, if error line for each page, machine will send RTN instead of RTN,in this case, some machine will resend the same page again. The retry timesdepend on other end.• Bit 6: If this bit set to “0”, the header select function can not change by user, onlychangeable by serviceman in service mode.Bit No. Designation FunctionInitialSettingBit HEX8 Time between phaseC to phase D signal inV.17Example:Image Æ EOP007 06 Header TX selectionopen to user0: No 01: Yes5 Reserved Reserved 04 003Transmit RTN signallevel criteria02 01 Reserved Reserved 0RXInsensitivity 70 ms 120 ms 180 ms 60 msBit No. 8 0 0 1 1Bit No. 7 0 1 0 1Percentage of error line 10% 15% 20% 25%Bit No. 3 0 0 1 1Bit No. 2 0 1 0 114.3.2 SOFT SWITCH: #0214.3.1 SOFT SWITCH: #0114.3 Soft switch definition |
Related manuals for Oki MC160MFP
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine