Oki MC160MFP Network Manual
Also see for MC160MFP: User guideSoftware installationSafety and Warranty GuideMaintenance manual
                                | |
Contents
| 
NETWORK SETTING Menu 1-9DNS CONFIG." When using network scanning and when specifying the SMTP serveras a host name instead of as an IP address, be sure to selectENABLE, and then specify the IP address of the DNS server.DHCPPurpose Sets whether or not the DNS server setting is to be speci-fied.If specifying the DNS server setting, the SMTP server canbe specified as a host name when using network scanning.If ENABLE is selected, type in the IP address of the DNSserver.If DISABLE is selected, the DNS server cannot be refer-enced.Options DISABLE/ENABLEDefault DISABLERange (If DNS CONFIG. is set to ENABLE)0-255 for each xxx tripletUse the keypad to input each number; use the andkeys to move between triplets.Notes A single digit number, such as “1”, cannot be input as “001”.Align the number on the left and input “1” as “1 _ _”. Usethe and keys to move between triplets.The BACK key can also be used for deleting. To cancel DNSCONFIG. menu, hold down the BACK key for more thanone second, and then press the BACK key again after allsettings have been cleared.After changing the settings, the machine must be turnedoff, then on again.Purpose If there is a DHCP server on the network, specifies whetherthe IP address and other network information is automati-cally assigned by the DHCP server.Options DISABLE/ENABLEDefault ENABLE |
Related manuals for Oki MC160MFP
manualsdatabase
Your AI-powered manual search engine