Oki MICROLINE 320 Turbo Maintenance Manual

Also see for Microline 320 Turbo D1: User guide Brochure & specs Product update User guide User guide

Contents

42089201TH Rev.4 95 /Oki Data CONFIDENTIALNote:BLINK1 : 400ms ON, 400ms OFFBLINK2 : 200ms ON, 200ms OFF— : LED is kept in Current Condition (no change)(2) Fault alram displayWhen the printer detects any of the various alarm states, the information is displayed asshown below on the operation panel. The alarm is specified by lamp combination of PRINTQUALITY and CHARACTER PITCH. (See Table 6.3 for details.)SELSELMENU SHIFTLFMicro FeedDownFF/LOADMicro FeedUpTEAR PARK QUIETTOFEXITPOWER ALARMGROUP ITEM SETMENUPRINTPRINT QUALITYCHARACTER PITCHHSD UTILITYNLQ SSDRESET1017122015PROPFigure 6-16.3 Lamp Display(1) Printer mode displayTable 6.2ALARMCATEGORY ALARMLED CONDITIONCONTENTS TROUBLESHOOTINGALARM SEL MENU 10CPI 15CPIOPERATORALARMPaper end alarm ON OFF From, cut sheet or bottompaper end Set New paper.Paper changelever alarm ON OFF BLINK1 OFFChange lever is set to TOPposition while paper isalready inserted from rear orbottom.• Set the lever to specifiedposition.• Check rear sensor lever.• Replace Control BoardPaper jam alarm ON OFF OFF BLINK1• Cut sheet could not beejected.• Cut sheet could not be fedproperly• Remove the paper or checkfeed Mechanism• Press SEL key.Print Headthermal alarm OFF BLINK1Print head temperatureexceeds 119°C• Wait until it is cooled.• Replace P.H. or DriverBoardSpace motorthermal alarm OFF BLINK1Temperature of space motorexceeds specified value.• It is recovered automatically• Replace SP motor or DriverBoardFATAL ALARM BLINK2 OFF OFF See Table 6.3 Hardware Alarm hasoccurred. See Table 6.3.