Oki MICROLINE ML521 Product Update

Also see for MICROLINE Turbo ML390: User guide Reference manual Specifications Installation Installation

Contents

Oki MICROLINE ML521 Product Update Manual pdf 6 page image

Page 6 of 20 P/N 58356302General Information (continued)Menu Settings TableMicroline 300 Series Printers ONLYThe settings listed below are the changes or additions to those listed in the Userís Guide.For a complete explanation of the menu and each menu item, refer to the Userís Guide, ìUsing Your Printer, Menu Mode,Explanations of Menu Items.îThe Userís Guide is provided as an Adobe Acrobat file on the CD provided with your printer.The table below shows the items that may appear in the menu. Settings which are engaged at the factory (defaults) are setin bold italic. Some groups or entries will only appear when a specific emulation is engaged, as noted.Menu_Settings_Table.docGroup Item Settings(Defaults are set in bold italic)Symbol Sets(ML390/391 Seriesprinters only)Code Page USA, Canada French, Multilingual, Portugal, Norway, BRASCII,Abicomp, Multilingual 858, ISO 8858-15Top Feed Form Tear-off Form Tear-off only appears when an optional Roll Paper Stand isinstalled.OFF, 500 ms, 1 sec, 2 secSet-Up CSF Bin Select CSF Bin Select only appears when an optional Dual Bin Cut Sheet Feederis installed.Bin 1, Bin 2CSF Type CSF Type only appears when an optional Cut Sheet Feeder is installed.Wide, NarrowESC SI Pitch 17.1 CPI, 20 CPISerial I/F Serial I/F only appears when an optional Serial Interface board is installed.Parity None, Odd, EvenSerial Data 7/8 Bits 8 Bits, 7 BitsProtocol Ready|Busy, X-ON/X-OFFDiagnostic Test No, YesBusyLine SSD -, SSD +, DTR, R TSBaud Rate 9600, 4800, 2400, 1200, 600, 300, 38400, or 19200 BPS38400 BPS is displayed only when an optional serial interface board with38400 firmware is installed.DSR Signal Valid, InvalidDTR Signal Ready on Power Up, Ready on SelectBusy Time 200 ms, 1 secCSF Bin 1 CSF Bin 1 only appears when an optional Cut Sheet Feeder is installed.Line Spacing 6 LPI, 8 LPIBottom Margin Valid, InvalidPage Width 13.6", 8"The setting for Page Width affects both Bin 1 and Bin 2.On a wide-carriage printer (321, 391), when Page Width is set to 8", theprinter prints 8" wide lines, not the full width of the printer.Page Length 11", 11 2/3", 12", 14", 17", 3.5", 4", 5.5", 6", 7", 8", 8.5"CSF Bin 2 CSF Bin 2 only appears when an optional Dual Bin Cut Sheet Feeder is installed.Line Spacing 6 LPI, 8 LPIBottom Margin Valid, InvalidPage Length 11", 11 2/3", 12", 14", 17", 3.5", 4", 5.5", 6", 7", 8", 8.5"