Oki ML1120 Plus User Manual
                                                                                         | |
Contents
|
ML1120 Plus/ML1190 Plus User’s Guide - Operating instructions > 58Menu IteM FunctIon SettIngSymbol setsmenuCode Page Select a code page. uSaCanada FrenchMultilingualPortugalNorwayBRASCIIAbicompMultilingual 858ISO 8859-15Rear feedmenuLine Spacing Select line feed pitch. 6 LPI8 LPIForm Tear-Off Select manual or auto asthe method to advancea continuous form to theform tear-off position.Manual0.5 sec1.0 sec2.0 secSkip OverPerforationSelect whether to skip overperforation or not. (When askip over perforation setupcommand is received,the received command isgiven priority.)25.4 mm(1 )noPage Length Select the length of acontinuous form.279.4 mm(11 )296.3 mm(11 2/3 )304.8 mm (12 )355.6 mm(14 )431.8 mm(17 )76.2 mm(3 )82.6 mm(3.25 )84.7 mm(10/3 )88.9 mm(3.5 )93.1 mm(11/3 )101.6 mm(4 )127.0 mm(5 )139.7 mm(5.5 )152.4 mm(6 )177.8 mm(7 )203.2 mm(8 )215.9 mm(8.5 )Cut positionadjustSelect an adjustment valuefor the position to cut theend of a continuous form.(In 1/180 in increments)-30 - -10+30 - +1TOF adjust(continuous)Select an adjustmentvalue for the referenceposition in regard tothe TOF position of acontinuous form.The position moves to therear of the form by [+] andto the top of the form by [-]in 1/180 in increments.-30 - -10+30 - +1 |
Related manuals for Oki ML1120 Plus
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine