Oki ML280 Elite User Manual
Also see for ML280 Elite: ManualParts list
                                                    | |
Contents
| 
SETTING UP YOUR PRINTER > 21TOP FEED SINGLE SHEET PAPERYour printer can accommodate single sheets of 216mm width x 297 or355mm length paper. Remove the Tractor Feed unit and any otheraccessories, then raise the Paper Separator into its upright position.1. Switch the printer ON.2. Move the Paper lever (1) (on the right-hand side of the printer)to the rear of the machine, to the Blank sheet of paper symbol.3. Ensure that the printer is OFF-LINE (press the SELECT switch ifnecessary).Make sure the Bail arm lever (2) is set to the rear of the machine(in its closed position).4. Raise the paper separator as shown above.5. Adjust the Cut Sheet guide (3) on the Paper Separator toposition the left edge of the sheet.NOTEIf letter size paper is used, set the cut sheet guide to the line mark on thepaper separator. 80 character width text (10cpi) is then positionedcentrally on the paper.123 |
Related manuals for Oki ML280 Elite
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine