Loading paper > 21R UNNING THE SELF TESTSFont sample testASCII testSELECTING AN EMULATIONThe factory default emulation for your printer is:To change to one of the other emulations:1. Make sure paper is loaded.2. Deselect the printer (SEL light off, press SEL key).MEDIA SETTING45 - 75g/m² paper 175-90g/m² bond paper 2Labels 3 - 4Envelopes 52-part form (w/carbon) 3 - 43-part form (w/carbon) 4 - 54-part form (w/carbon) 5To run the test: Turn the printer off, then press and hold LF whileturning the printer on.To stop the test: If you wish to stop the test before it is complete,press SEL.To run the test: Turn the printer off, then press and hold QUIETwhile turning the printer on.To stop the test: Press SEL.MODEL EMULATION (DEFAULT)ML3320ECO/ML3321ECO IBM PPRML3390ECO/ML3391ECO EPSON LQ