Page: 65Service Guide ML390/391Chapter 3 Maintenance & Disassembly3.2.21 Line Feed Motor Interconnect ModuleNOTE:Use care when performing this procedure. The plastic extension will break if too much pressure is applied.· Perform these procedures: 3.2.01 ,3.2.02 , 3.2.04 , 3.2.05 , 3.2.06 , 3.2.20 .· Insert a straight-slot screwdriver between the line feed motor interconnect module (1) and the chassis.Then, carefully pry the module from the two guide holes (2).P/N 53328401 Module: LF Motor Interconnect All RSPL A B C B.2.05 , B.2.07Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA BusinessPartner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
