Maintenance 55Bits of Paper Stuck in the Paper Path1 Turn off the printer.2 Use the platen knob to back the paper all the way out of theprinter.CAUTION!Make sure the printer is turned off before you open the accesscover.3 Open the access cover (1) and remove the pull up rollerassembly (2). Then grasp the tabs (3) on the sheet guide (4)and lift it off the printer.Rear-Feed, Repeating Paper JamsIf the paper keeps jamming, you may have:• defective paper• misaligned paper• bits of paper stuck in the paper pathDefective PaperReplace the paper with a fresh stack.Misaligned Paper1 Turn off the printer.2 Use the platen knob to back the paper all the way out of theprinter.3 Tear off a couple of sheets of paper, leaving a new, clean,square-cut edge.4 Reload the paper and turn the printer back on.
