Oki ML6300FB Safety And Regulatory Information Manual

Contents

Oki ML6300FB Safety And Regulatory Information Manual Manual pdf 1 page image

1ML6300F-SCSafety, Warranty and Regulatory InformationSafety InformationYour OKI product has been carefully designed to give you years ofsafe, reliable performance. As with all electrical equipment, thereare a few basic precautions you should take to avoid hurtingyourself or damaging the product.• Carefully read the provided setup and operatinginstructions.• Save all provided documentation for future reference.• Read and follow all warning and instruction labels on theproduct itself.• SIDM only The printhead can get quite hot when it hasbeen printing for a length of time. Do not touch theprinthead until it has had a chance to cool off.• Unplug the product before you clean it. Use only a dampcloth; do not use liquid or aerosol cleaners.• Place your product on a firm, solid surface. If you put it onsomething unsteady, it may fall and be damaged. If youplace it on a soft surface, such as a rug, sofa, or cushion,the vents may be blocked, causing the product tooverheat.• Protect your product from overheating. Make sure noobstructions block the openings of the product. Do not putthe product on or near a heat source (such as a radiatoror heat register). Keep the product out of direct sunlight.• Always use this product in a well ventilated area. Allowenough room around the product for adequate ventilationand easy access to the paper trays. If you put the productin any kind of enclosure, make sure the enclosure is wellventilated.• Do not use your product near water. Do not spill liquid ofany kind into it.• Be certain that your power source matches the ratinglisted on the back of the product. If you are not sure,check with your dealer or with your local power company.• Do not connect this product to an uninterruptible powersupply (UPS). For further information please contact OkiData at 1-800-OKI-DATA.• Your product has a grounded, three-prong plug as asafety feature. This plug only fits into a grounded outlet.If the plug does not fit, the outlet may be an older,non-grounded type. Contact an electrician to have theoutlet replaced. Do not use an adapter to defeat thegrounding.• Install the product near an easily accessed power outlet.• Avoid damaging the power cord. Do not put anything on itor place it where it will be walked on. If the cord becomesdamaged or frayed, replace it immediately.• If you are using an extension cord or power strip with theproduct, make sure that the total of the amperes requiredby all the equipment on the extension is less than theextension’s rating. The total ratings of all equipmentplugged into the outlet should not exceed 15 amperes.• Important! A telephone cable using 26 AWG wire or largermust be used with this equipment.• Do not poke anything into the ventilation slots of theproduct. You could get an electrical shock or causehazardous electrical arcing, which could cause a fire.• Aside from the routine maintenance described in thedocumentation, do not try to service the product yourself.Removing the cover may expose you to shocks or otherhazards.• Do not make any adjustments other than those outlinedin the documentation. You may cause damage that willrequire extensive repair work. The provideddocumentation explains how to get your product servicedby qualified Oki Data technicians.If anything happens that indicates that your product is not workingproperly or has been damaged, unplug it immediately and followthe procedures in the provided documentation for having yourproduct serviced.Here are some of the things to look for.• The power cord or plug is frayed or damaged.• Liquid has been spilled into the product, or the producthas been exposed to water.• The product has been dropped, or the cabinet isdamaged.- The product does not function normally when you arefollowing the operating instructions.