Oki MPS420b Material Safety Data Sheet

Also see for MPS420b: Maintenance manual User guide

Contents

Oki MPS420b Material Safety Data Sheet Manual pdf 3 page image

3 - EnglishSafety Information,220/240-Volt ModelsThis product has been carefully designed to give years of safe,reliable performance. As with all electrical equipment, however,there are a few basic precautions that should be taken to avoidinjury or damage:Ensure this and all other documentation is both read carefullyand retained for future reference.Ensure all warning and instruction labels on the product areread, understood and followed in order to prevent any risk ofinjury.This product may be heavy. Please check the weight of theproduct and take all necessary precautions to prevent the riskof personal injury.The product must be placed on a flat solid surface strongenough to support its weight to prevent any risk of injury.Ensure that there is adequate ventilation all around theproduct to prevent overheating and any risk of fire.Keep the product away from direct heat sources such asradiators and out of direct sunlight to prevent any risk ofoverheating.The power supply required for this product is 220-240 VAC,50/60 Hz. (For any DC powered product, the figures are 9.6-31.2VDC, 4-1.8A.) Refer to your product's rating label on themachine for full power rating details. Ensure that you have asuitable power supply before connecting the product. If indoubt contact your dealer or check with your local powerprovider.Ensure both the product and mains power switches are in theOFF position before connecting the AC power cable.Do not connect or disconnect the power plug with a wet handas this may cause electric shock.Always hold the power plug to connect/disconnect the powercable to/from the mains socket. Unplugging by pulling on thecable can cause fraying and may lead to fire or electric shock.This product has an earthed plug as a safety feature and willonly connect to an earthed socket. Do not attempt to defeatthe earthing or there is a risk of fire or shock.If using an extension cable or power strip ensure that the totalcurrent rating (amperes) of all connected equipment is lessthan the maximum rating of the extension cable, power stripor wall outlet. If the product is already supplied with a fittedpower strip then no additional power strip or extension cableshould be used to connect to the mains wall outlet. Otherwise,fire or shock may occur.Ensure the power cable is routed so as not to be damaged orcause a trip hazard. If the cable becomes frayed or damagedreplace it immediately to prevent any risk of shock.Do not twist, constrict or knot the power cable as this cancause overheating which may lead to fire or electric shock.Ensure the power socket to which the product is connected iseasily accessible at all times and not obstructed.Use only the power cable supplied. Using a power cable notintended for this product may lead to fire or electric shock.To avoid risk of fire and electric shock, do not use the powercable supplied with this product for any other electricalequipment.If you do not connect the power cord or any other cables onlyas directed in the User's Guide, this may result in a fire.It is recommended that the machine is switched off prior toopening covers; otherwise there is a risk of electric shock.When the product cover is open, do not touch the fuser unit orprint head as you may receive burns. Allow it to cool beforetouching.If the product casing gets extremely hot or smoke, unusualsmells or abnormal noises are emitted from the product, thereis a risk of fire. Unplug the mains connector and contact yourdealer.If the product has been knocked over or damaged, there is arisk of electric shock, fire and/or injury. Unplug the mainsconnector and contact your dealer.If any liquid (for example water) is allowed to enter theproduct, there is a risk of fire. Unplug the mains connectorand contact your dealer.Do not place containers containing liquid on the product aselectric shock, fire and/or injuries may occur.If any foreign objects (for example clips) are allowed to enterthe product, there is a risk of electric shock, fire and/or injury.Unplug the mains connector before removing the object.Do not introduce foreign objects into the ventilation holes oroperate this product with any covers open or doors removed aselectric shock, fire and/or injuries may occur.Do not use an extremely flammable spray near the product asthe product contains high temperature parts that may cause afire.Switch the product off before cleaning to prevent any risk ofinjury. Clean using a damp cloth. Do not use liquid or aerosolcleaners.Ensure loose clothing and hair is kept clear of moving partswhen the product is in operation to prevent possible risk ofinjury.Do not carry out any operations on the product that are notspecified in the User's Guide. This may result in electric shock,fire and/or injury.Do not touch the battery if one is fitted to the product. Thereis a risk of explosion if the battery is replaced by an incorrecttype. The product battery should not require replacementduring the life of the product.Do not throw toner cartridges or image drum cartridges into afire as you may receive burns from a dust explosion.After installing additional memory, hard disk drive, or anyother internally fitted option, any covers removed or doorsopened must be closed or replaced and secured to preventrisk of fire.The acoustic noise of this product is less than 70 dB (A) asmeasured in accordance with EN ISO 7779.The operating condition range for your product is: 10 to 32°Cand 20 to 80% RH. Operation of the product outside thisrange could result in damage to the product.If a scanner, finisher etc. is fitted, exercise care when movingthese items so as to avoid risk of entrapment or personalinjury.If the product is installed on a cabinet or high capacity feeder,ensure wheel locks are applied once placed in final position foruse, to prevent risk of movement or injury.