Oki MPS610c User Manual

Also see for MPS610c: User guide Handy reference Guide de l'utilisateur

Contents

10 - EnglishPreventive Measures ___________Personal Protective EquipmentRespiratory Protection: Not normally required. For largespills, use dust respirator during cleanup.Protective Gloves and/or Eye Protection: Notnormally required. For large spills, use rubber gloves andsafety goggles during cleanup.Engineering ControlsVentilation: Outside of normal ventilation, not normallyrequired.Other Protective Equipment and/or HygienicPractices: None.Spill CleanupSmall Spills1. Remove sources of ignition.2. Carefully clean up the spill with a wet cloth, avoidinginhalation of fine dust.Large Spills1. Remove sources of ignition and keep unnecessary andunprotected personnel away from area.2. Wear protective gear: respirator, rubber gloves, safetygoggles.3. Vacuum the spill, then wipe up remainder with a wetcloth.Waste Disposal• Prevent release of material into natural waters andsewers.• Follow appropriate federal, state and local regulations.• Small amounts can be incinerated.Careful! Combustion can create harmful gases such ascarbon monoxide and nitrogen oxides.• Large amounts must be passed to a licensed wastecontractor.PrecautionsPrecautions for Handling or Storage: Protect from thesun. Store in a cool room, under 104°F (40°C). Keep out ofreach of children.Other Precautions: None.Shipping InformationSpecial Shipping Information: Non hazardous. Handlecontainer carefully to avoid shock. Do not drop. Keep dry.User’s Responsibility ____________This bulletin cannot cover all possible situations which theuser may experience when using this product. Each aspectof your operation must be examined in regard to if, orwhere, additional precautions may be necessary. All healthand safety information contained in this bulletin must beprovided to your employees or customers. It is yourresponsibility to use this information to develop appropriatework practice guidelines and employee instructionalprograms for your operation.Preparation Date of MSDSDate: May 15, 2010.Prepared by:Oki Data Americas, Inc.Engineering Services Department.2000 Bishops Gate Blvd.Mt. Laurel, NJ 08054-4620Tel: (856) 235-2600Fax: (856) 222-5320http://WWW.OKIPRINTINGSOLUTIONS.COMmy.okidata.com