74 – MPS710c User’s GuideFuser Replacement ______________The fuser is located inside the printer just behind the four imagedrum units.1. Press the cover release and open the printer’s top coverfully.2. Identify the fuser handle (a) on the top of the fuser unit.WARNINGIf the printer has recently been powered on, somefuser components will be very hot. Handle the fuserwith extreme care, holding it only by its handle, whichwill only be mildly warm to the touch. A warning labelclearly indicates the area. If in doubt, switch theprinter off and wait at least 10 minutes for the fuserto cool before opening the printer cover.bba
