57 – MPS610c/MPS711c User’s GuideBoot MenuThis menu should only be changed by the System Administrators. In order togain access to this menu, follow the instructions in “How to Change theSettings: Administrator” on page 27.This menu is in English only (default settings in bold type).Parallel SetupThis menu controls the operation of the printer’s Parallel datainterface.Cyan/Magenta/Yellow/BlackTuningHighlight –3,–2,–1,0,+1,+2,+3,Adjusts HIGHLIGHT (light area)of the TRC.+ = Darker– = LighterMid-Tone –3,–2,–1,0,+1,+2,+3,Adjusts MID-TONE area of theTRC.+ = Darker– = LighterDark –3,–2,–1,0,+1,+2,+3,Adjusts DARK area of the TRC.+ = Darker– = LighterCyan/Magenta/Yellow/BlackDarkness–3,–2,–1,0,+1,+2,+3,Adjusts the engine density.Note:This menu item only applies to the MPS711c.ITEM SETTINGS EXPLANATIONEnterPasswordxxxxxxxxxxxx Enter a password to access the Boot menu.Password should be from 6 to 12 digits ofalpha/numeric characters (or mix)The default value is “aaaaaa”Parallel Enable /DisableEnables or disables the parallel port.ITEM SETTINGS EXPLANATION