MPS730b User’s Guide > 51Admin\ Network MenuDefault settings are in bold face type.Submenus AvailableSettingsTCP/IP Enable, DisableIPv6 Enable, DisableIPSec Enable, Disable802.1X Enable, DisableNetware Enable, DisableEthertalk Enable, DisableIP Address Set Automatic, ManualIP Address (user-specified)Subnet Mask (user-specified)Gateway Address (user-specified)Factory Default ExecuteDNS Enable, DisableWINS Enable, DisableWeb Enable, DisableSNMP Disable, SNMP v1/v2, SNMP v1/v2/v3, SNMP v3FTP Print Enable, DisableHub Link Setting Auto Negotiate, 10 Base-T Full, 10 Base-T Half,100 Base-T Full, 100 Base-T Half, 1000 Base-T Full,1000 Base-T HalfPS Protocol ASCII, RAWHTTP Port 1 - 9999, Default is 80Netware Frame Auto-Sense, 802.3, Ethernet II, 802.2 SNAP, 802.2
