5 - English3. Install the ribbon.32t-19dn.jpg4. Install any accessories you purchased. Refer to theinstructions provided with each accessory.5. Connect to the power outlet.Paper LoadingTo load single sheets, see your Printer User's Guide,"Installation, Paper Loading."To load bottom-feed paper, see the instructionsprovided with the pull/push tractors.To load rear-feed, continuous-forms paper:1. Grasp the tabs and lift off the paper separator.32T-23b.jpg2. Load the paper on the tractors. Install the paperseparator.32T-29.jpg32T-23c.jpg3. Place the wire guide (1) on the pull-up rollerassembly (2). Then, press FF/LOAD.32T-31.jpgTesting the PrinterWide Carriage ModelsMicroline 321 Turbo/n, Microline 391 Turbo/nIf you are using 8.5 inch paper to run the test,make sure the paper width selection in the printermenu is set to 8.5 inches. Otherwise, printing onthe platen may damage the printer. Refer to thePrinter User's Guide, "Using Your Printer, MenuMode, Explanations of Menu Items."Run the Font Sample Test to make sure your printer isoperating properly.To run the test:ï Turn the printer off, then press and hold the LFkey while turning the printer back on.To stop the test before it is finished:ï Press SEL.1 2