Oki OKIPAGE 14ex Setup Manual

Also see for OKIPAGE14i: User guide Installation and setup User guide Installation instructions Limited warranty

Oki OKIPAGE 14ex Setup Manual Manual pdf 16 page image

12OKIPAGE 14ex, 14i and 14i/nUSB Port driverNote: Installation of USB driver is only required forWindows 98.GeneralA USB interface has the following restrictions:• Will not operate using a MS-DOS or Windows95/3.1/NT 4.0/NT 3.51 operating system.• Will not operate using a Windows 98 operatingsystem that has been upgraded from a Windows95/3.1 operating system.• Do not disconnect the USB interface cable duringprinting.• Do not immediately disconnect and connect theUSB cable or vice versa. Wait at least 5 secondsbefore re-connecting or disconnecting the cable.• The operation of a printer is not assured if a USBcompatible device is connected concurrently withother USB-compatible machines.• When connecting multiple printers of the sametype, they appear in the print folder as *****,***** (copy2), ***** (copy3), etc. Thesenumbers depend on the order of connecting orturning on each printer.• If a USB hub is used, it is necessary to connectthe USB hub directly to the computer.Installation1. After the [Add New Hardware Wizard] windowappears, click on [Next].2. Select [Search for the best driver for my device(Recommended)] and click on [Next].3. Insert the printer software CD-ROM disk into theCD-ROM drive.4. Make sure CD-ROM drive is checked and clickon [Next].5. After Windows finds the USB driver, click on[Next].6. After files have finished copying, click on[Finish].7. If the [Add New Hardware Wizard] windowappears again, click on [Cancel] and restart thecomputer.