4Pull the tray out.Push the tray back in.Adjust the guides (1) and load paper. Paper Gauge:Indicates the amount ofpaper left in the drawer.Models 24Tn & 24DXn Only: Load the 2nd Paper Tray in the same manner.1 Turn the printer on.2 Press ON LINE.! To print envelopes, transparencies,labels, etc., use the front feeder andthe rear exit path: see “How Do I?”in the on-line User’s Guide for moreinformation.Open.Lift.Models Furnished with 2nd PaperTrayThe printer is set to print from Tray 1. Youcan set the printer to automatically switchto Tray 2 when Tray 1 is empty, or to makeTray 2 the default. See “How Do I?” in theon-line User’s Guide.Front Panel Display LanguageTo change the display language, see “FrontPanel” under Printer Controls in theon-line User’s Guide.Power Save Delay & Quiet Mode SettingsThe printer comes with Power Save Delay on.! For the fastest possible time to print, set the Power Save Delayto Disabled and the Quiet Mode to Off: see “Time to Print”under Printer Controls in the on-line User’s Guide.Printer EmulationThe printer automatically switches emulations depending on whatdriver it detects when it receives a document. To select a specificemulation, see “Selecting an Emulation” under Printer Controls inthe on-line User’s Guide.3 Hold FORM FEED until PRINT DEMO PAGE appears on the display.4 Press ENTER, then ON LINE.You’re now ready to install the software: see Part 2.! The printer comes set for standard, 8½" x 11", 20-lb. paper fed from Tray 1. To change the default toanother print media, size or paper source, see “How do I?” in the on-line User’s Guide.5 Load Paper6 Open the Top Paper Exit Path.7 Print the Demo Page.8 Check the Settings.1