Oki OKIPAGE 8z Service Handbook

Also see for OKIPAGE 8w Lite: Installation and setup Setup guide User guide Setup guide Manual

Contents

4 - 34.2.2 Uploading and Downloading EEPROM DataWhen the main control board is replaced, EEPROM data must be reflected on a new main controlboard. Use “EEPROM Operations” in the option tab of the maintenance utility to reflect EEPROMdata on the new main control board. (See Figure 4-4.)Reflect EEPROM data on the new main control board in the following procedures:(1) Check that the printer and PC are connected by the parallel I/F, then execute themaintenance utility.(2) Click the "Option" button in "Main Menu Dialog".(3) Click the “Upload” button (Upload EEPROM Data) in “EEPROM Operations.” (EEPROMdata read is completed.)(4) The read EEPROM data is displayed in “Dialog” of the maintenance driver.(5) Leave the display of the maintenance driver as is and replace the main control board.(6) Click the “Download” button (Download EEPROM Data) in “EEPROM Operations”. (EEPROMdata write is completed.)Depending on the level of a main control board failure (parallel I/O failure, etc.), however,EEPROM data may be unable to be uploaded.In such a case, use the maintenance utility to perform the following adjustment after replacing themain control board:• Setting the LED head drive time (Section 4.2.1)• Setting the LED head count (OKIPAGE 8z only)• Setting specifications (ODA/OEL/INT-A/INT-L)