| E-11Warranty, Regulatory Information, and SpecificationsToner gets in the eyesFlush eyes with large quantities of cool water for 15minutes, keeping the eyelids open with fingers. Seekmedical attention.! Small amounts of toner on skin or clothing can easilybe removed with soap and cold water. Hot water makestoner harder to remove.Hazardous IngredientsStyrene-Butyl Acrylate Copolymer (91% by weight)CAS# 25767-47-9OSHA TWA 15 mg/m3 for total dustACGIH TLV 10 mg/m 3 for total dustCarbon Black (5-7% by weight)CAS# 1333-86-4OSHA TWA 3.5 mg/m3ACGIH TLV 3.5 mg/m3Paraffin Wax (less than 3% by weight)CAS# 8002-74-2OSHA TWA 2 mg/m 3 for total dustACGIH TLV 2 mg/m 3 for total dustAmorphous Fumed Silica (less than 1% by weight)CAS# 67762-90-7OSHA PEL 15.0 mg/m 3 for total dustACGIH TLV 10.0 mg/m3 for total dust! This product is not regulated under Section 313 ofSARA, Title III.Physical DataMelting Point110°C (230°F)Boiling PointNot applicableVapor PressureNot applicableVapor Density (Air=1)Not applicableEvaporation Rate (Butyl Acetate=1)Not applicable
