Oki OKIPAGE10e Quick Start Manual
Also see for OKIPAGE 10e: User manualManualUser manualSpare parts listSetup guide
                      | |
Contents
| 
E-14 |OKIPAGE 10ePrinting the Demo and Menu PagesWith the printer powered up but off line, press down on theprinter’s operator panel switch for two seconds. The printerthen prints the demo page and the menu page.Interfacing with your ComputerYour printer has a high-speed, bi-directional parallel IEEE 1284interface port. Purchase a cable marked IEEE 1284 compliant.To comply with FCC regulations, the cable must be shieldedand UL and CSA approved. Consult your PC manual for detailson cable requirements and interface ports on your computer.! OKIDATA has tested and approved the following bi-directional cable: Part Number 70000803. See Serviceand Support in the User’s Guide for purchasinginformation.Connecting the CableMake sure the printer and computer are off.1 Insert the printer end of the cable firmly into the properconnector on the back of the printer. Fasten the cable tothe printer securely.2 Connect the other end of the cable to the proper connectoron your computer. Fasten the cable securely to yourcomputer. |
Related manuals for Oki OKIPAGE 10e
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine