Microsoft Windows 5711. Confirm your configuration. If everything is correct, select[Execute] to apply the configuration. Set-up has now beencompleted. Select [Finish].Now that both Windows and the printer have been configured to useTCP/IP, the next step is to configure Windows to print to the networkprinter.Windows 95/98/MeWhen printing using TCP/IP the OkiLPR utility is the only option to use.The following procedure should be used.When installing the driver, ensure it is installed as a local printer andnot a network printer. Ensure the appropriate printer driver has beeninstalled in Windows.Install the OkiLPR utility as described on page 49 of this manual andadd the printer installed earlier.
