| 
– –* Automatically the printer is recovered if the cutter returns to the home position after turn-ing the power OFF and ON.Restoration is also possible with the n command when in the ESC/POSmode.Note) If the cutter doesn’t return to the home position, or doesn’t perform the initial move-ment, it cannot be recovered.) If the paper is jammed, turn the power OFF, clear the jammed paper, then turn thepower ON.) When the error occurs:STAR Mode: Non recoverable errorESC/POS Mode: Recoverable error* Turn the power OFF, clear the jammed paper or remedy another problem and then turnthe power ON. Automatically the printer is recovered if the carriage returns to the homeposition after turning the power OFF and ON.Restoration is also possible with the n command when in the ESC/POSmode.When the error occurs:STAR Mode: Non recoverable errorESC/POS Mode: Recoverable error* For paper jam errors:Clear the jammed paper and change the paper roll if necessary.For incorrect paper format errors:Change the paper roll and use a paper roll with the correct black mark.) Non recoverable errorError Description POWER lamp ERROR lamp BuzzerFlash memory writeerrorOff Flashes (On: sec./Off: sec.)NoneThermistor failureerrorOff Flashes (On: 0.5sec./Off: 0.5 sec.) short beeps (0. sec. + 0.5 sec.)Power supply error Off Flashes (On: sec./Off: sec.)NoneCPU error Off On One long beep ( sec.)RAM R/W error Off On NoneNoteIf a non-recoverable error occurs, turn the power OFF, wait at least 0 seconds, and turnthe power back ON. If the non-recoverable error continues to be indicated, consult a dealerfor repairs. |
