91Item No.78ItemsAuto Gap Motor AssyBacklashBail Gear Assy BacklashStandard ValueJ=0.1mmK=0.2mmIllustration Adjustment Method1Verify the backlash is 0.1 mm bet-ween the idle gear and the adjustingcam.2If adjustment is required, screw downthe 2 screws fixing the auto gap assy,and ensure the backlash between theidle gear and the adjusting cam.1Verify the backlash is 0.2 mm bet-ween the idle gear A and the drive gearB, and between the idle gear B and theidle gear C.2If adjustment is required, screw downthe 2 screws fixing the bail gear assy,and ensure the back lash between theidle gear A and the drive gear B, andbetween the idle gear B and the idlegear C.Mounting ScrewsMounting ScrewsMounting ScrewsMounting ScrewsBail Gear AssyIdle Gear BIdle Gear CIdle Gear ADrive Gear BAdjusting CamChange MotorIdle GearJKK
