Oki PAGE 10ex User Manual

Also see for OKIPAGE 10ex: Specification sheet User guide Setup guide Troubleshooting manual Maintenance manual

Oki PAGE 10ex User Manual Manual pdf 4 page image

OKIPAGE 10ex, 12i/nyou yearsuipment,ld take tofully. Bes on thea damput it ond; if youbed, theoverheat.sure allt put ther or heatugh roomsy accessof any• Be certain that your power source matches the rating listedon the back of the printer. If you are not sure, check withyour dealer or with your local power company.• Your printer has an earthed, 3-pin plug as a safety feature,and it will only fit into an earthed outlet. If you can notplug it in, chances are you have an older, non-earthed outlet;contact an electrician to have the outlet replaced. Do notuse an adapter to defeat the earthing.• To avoid damaging the power cord, do not put anything onit or place it where it will be walked on. If the cord becomesdamaged or frayed, replace it immediately.• If you are using an extension cord or power strip with theprinter, make sure that the total of the amperes required byall the equipment on the extension is less than theextension’s rating. The total ratings of all equipmentplugged into the outlet should not exceed 15 amperes.• The power outlet into which you plug your printer mustremain accessible at all times.• Lifting the top cover exposes hot surfaces. These are clearlylabelled. Do NOT touch them.• Do not insert anything into the ventilation slots on theprinter; you could get a shock or cause a fire.28/09/98, 11:49