Oki PAGE 6E Help Manual

Also see for OKIPAGE 6e: Read me first User guide Maintenance manual Service manual

OKIPAGE 6e/6exongs itrorp”ProblemInsufficient printer memory for this image at thisresolution.Configuration error.Incorrect cable configuration.(Also, see “Software Problems.”)Booting the computer while the printer is on cancause a communications error.Gases are given off by forms or adhesives passingthrough the hot fusing unit.Power Save mode is set on to conserve energy. Thefuser must heat up before you can begin printingthe next job.SolutionChange the resolution, reduce the image size,or install more memory in your printer.Check cable connection. If more than one printeris available, make sure your printer has beenselected.Check cable configuration, continuity, and length.Turn printer off before rebooting computer.Make sure the forms you use can withstandheating, and provide adequate ventilation.To eliminate warm up delay, change Power Savesetting in the soft control panel.10/13/97, 09:36