3.1.8 Vertical Mount (reverse printing)Set this to Enable if the printer is mounted on the wall or is stood up vertically.This setting makes it possible for the customer to view the printout in the correct orientation when theprinter is installed vertically.Available settings are as follows.Setting Default MeaningDisable ○ Prints normally.Enable Printing is inverted, top to bottom. (Use when printer ismounted on wall or standing vertically.)Selecting normal or reverse printing:Important: The vertical mount (reverse printing) setting is enabled only when “Raster mode” isselected for the print mode. Note that it is not possible to use the logo printing settingsand reverse printing at the same time.54
